Get started with Deta Base using the ESP32 board. Deta Base is a NoSQL database. It is unlimited, free, and easy to use. Additionally, it requires minimal setup. So, it’s …
In this guide, we’ll take a look at the basics of MicroPython asynchronous programming with the Raspberry Pi Pico using the asyncio module. You’ll learn to run multiple tasks concurrently, …
In this guide, we’ll take a look at the basics of MicroPython asynchronous programming with the ESP32 and ESP8266 NodeMCU using the asyncio module. You’ll learn to run multiple tasks …
In this guide, you’ll learn how to use an anemometer with the Arduino board to measure wind speed. We’ll cover how to power and connect the sensor to the Arduino …
In this guide, you’ll learn how to interface an anemometer with the ESP8266 NodeMCU board to measure wind speed. We’ll cover how to power and connect the sensor to the …
In this guide, you’ll learn how to interface an anemometer with the ESP32 to measure wind speed. We’ll cover how to power and connect the sensor to the ESP32 board, …
The Raspberry Pi Pico W comes with the Infineon CYW43439 chip that contains a 2.4 GHz radio providing 802.11n Wi-Fi. This tutorial is an introduction to Wi-Fi on the Raspberry …
This article is a complete guide for the ESP32 deep sleep mode with Arduino IDE. We’ll show you how to put the ESP32 into deep sleep and take a look at different modes to wake it up: timer wake up, touch wake up, and external wake up.
This article shows how to put the ESP32 in deep sleep mode and wake it with an external wake up like a button press. We’ll cover how to use ext0 and ext1 methods.
In this guide, you’ll learn how to turn your ESP32 and a TFT display into a weather station that displays weather description, temperature, humidity, and date. We’ll use the LVGL …
In this project, you’ll learn how to turn your ESP32 Cheap Yellow Display (CYD) board into a weather station that displays weather description, temperature, humidity, and date using LVGL (Light …
Learn how to interface the NEO-6M GPS module with the Raspberry Pi Pico to get GPS data: latitude, longitude, altitude, date, and time. We’ll show you how to connect the …
In this guide, you’ll learn how to interface the NEO-6M GPS module with the ESP32 board programmed with MicroPython. You’ll learn how to get raw GPS data and how to …
Learn how to interface the NEO-6M GPS module with the ESP32 to get GPS data. You’ll learn how to get raw GPS data and interpret NMEA sentences. Finally, we’ll show …