Learn how to use the I2C LCD (Liquid Crystal Display) with the Raspberry Pi Pico programmed with MicroPython. We’ll cover how to write static text, scrolling text, and how to display custom icons.
New to the Raspberry Pi Pico? Read the following guide: Getting Started with Raspberry Pi Pico (and Pico W).
Table of Contents
Throughout this guide, we’ll cover the following topics:
- Introducing the LCD
- Wiring the I2C LCD to the Raspberry Pi Pico
- LCD Libraries – MicroPython
- Displaying Static Text
- Displaying Scrolling Text
- Displaying Custom Characters
Prerequisites
Before proceeding, make sure you check the following prerequisites:
MicroPython Firmware
To follow this tutorial you need MicroPython firmware installed in your Raspberry Pi Pico board. You also need an IDE to write and upload the code to your board.
The recommended MicroPython IDE for the Raspberry Pi Pico is Thonny IDE. Follow the next tutorial to learn how to install Thonny IDE, flash MicroPython firmware, and upload code to the board.
Alternatively, if you like programming using VS Code, you can start with the following tutorial:
Parts Required
To follow the examples in this tutorial, you need the following parts:
You can use the preceding links or go directly to MakerAdvisor.com/tools to find all the parts for your projects at the best price!
Introducing the LCD
One of the simplest and cheapest display screens around is the liquid crystal display (LCD). LCDs are found in everyday electronic devices like vending machines, calculators, parking meters, and printers, and are ideal for displaying text or small icons.
LCDs are measured according to the number of rows and colÂumns of characters that fit on the screen. A 16Ă—2 LCD can display 2 rows of 16 characters each. You’ll find sizes ranging from 8Ă—1 to 40Ă—4.
One of the easiest ways to control an LCD with a microcontroller is using one that comes with an I2C interface. We’ll use a 16×2 LCD that uses I2C communication.
To follow this tutorial, you should get one that also uses I2C. As for the size, you can choose whatever size you want, and it should be compatible.
LCD with I2C Driver
The advantage of using an I2C LCD is that the wiring is really simple. You just need to wire the SDA and SCL pins.
Additionally, it comes with a built-in potentiometer to adjust the contrast between the background and the characters on the LCD. On a “regular” LCD without I2C support, you need to add a potentiometer to the circuit to adjust the contrast.
Wiring the I2C LCD to the Raspberry Pi Pico
Because this LCD module supports I2C communication, wiring is very straightforward. We’ll connect the I2C pins to GPIO 5 and GPIO 4, but you can use any other I2C pins as long as you adjust the code. The VCC pin of the LCD needs to be connected to 5V. So, you’ll connect it to the VBUS (5V) pin.
| LCD Display | Raspberry Pi Pico |
| SCL | GPIO 5 |
| SDA | GPIO 4 |
| VCC | VBUS (5V) |
| GND | GND |
Recommended reading: Raspberry Pi Pico and Pico W Pinout Guide: GPIOs Explained
Circuit Diagram
You can also use the following diagram as a reference.
Finding the LCD I2C Address
Most I2C LCDs will have the I2C address 0x27. However, yours might be different. So it’s important to check the I2C address before continuing.
Follow the next tutorial to double-check your display I2C address:
LCD Libraries – MicroPython
There are different libraries that make it easy to communicate with the LCD. We’ll use a combination of two different modules developed and forked by this GitHub user.
Follow the next steps to install the two required modules.
Download and Upload the lcd_api.py
- Click here to download the lcd_api.py code;
- Copy the code to a file on Thonny IDE;
- Go to File > Save as… and select Raspberry Pi Pico;
- Save the file with the name lcd_api.py (don’t change the name).
# forked from https://github.com/T-622/RPI-PICO-I2C-LCD/
import time
class LcdApi:
# Implements the API for talking with HD44780 compatible character LCDs.
# This class only knows what commands to send to the LCD, and not how to get
# them to the LCD.
#
# It is expected that a derived class will implement the hal_xxx functions.
#
# The following constant names were lifted from the avrlib lcd.h header file,
# with bit numbers changed to bit masks.
# HD44780 LCD controller command set
LCD_CLR = 0x01 # DB0: clear display
LCD_HOME = 0x02 # DB1: return to home position
LCD_ENTRY_MODE = 0x04 # DB2: set entry mode
LCD_ENTRY_INC = 0x02 # DB1: increment
LCD_ENTRY_SHIFT = 0x01 # DB0: shift
LCD_ON_CTRL = 0x08 # DB3: turn lcd/cursor on
LCD_ON_DISPLAY = 0x04 # DB2: turn display on
LCD_ON_CURSOR = 0x02 # DB1: turn cursor on
LCD_ON_BLINK = 0x01 # DB0: blinking cursor
LCD_MOVE = 0x10 # DB4: move cursor/display
LCD_MOVE_DISP = 0x08 # DB3: move display (0-> move cursor)
LCD_MOVE_RIGHT = 0x04 # DB2: move right (0-> left)
LCD_FUNCTION = 0x20 # DB5: function set
LCD_FUNCTION_8BIT = 0x10 # DB4: set 8BIT mode (0->4BIT mode)
LCD_FUNCTION_2LINES = 0x08 # DB3: two lines (0->one line)
LCD_FUNCTION_10DOTS = 0x04 # DB2: 5x10 font (0->5x7 font)
LCD_FUNCTION_RESET = 0x30 # See "Initializing by Instruction" section
LCD_CGRAM = 0x40 # DB6: set CG RAM address
LCD_DDRAM = 0x80 # DB7: set DD RAM address
LCD_RS_CMD = 0
LCD_RS_DATA = 1
LCD_RW_WRITE = 0
LCD_RW_READ = 1
def __init__(self, num_lines, num_columns):
self.num_lines = num_lines
if self.num_lines > 4:
self.num_lines = 4
self.num_columns = num_columns
if self.num_columns > 40:
self.num_columns = 40
self.cursor_x = 0
self.cursor_y = 0
self.implied_newline = False
self.backlight = True
self.display_off()
self.backlight_on()
self.clear()
self.hal_write_command(self.LCD_ENTRY_MODE | self.LCD_ENTRY_INC)
self.hide_cursor()
self.display_on()
def clear(self):
# Clears the LCD display and moves the cursor to the top left corner
self.hal_write_command(self.LCD_CLR)
self.hal_write_command(self.LCD_HOME)
self.cursor_x = 0
self.cursor_y = 0
def show_cursor(self):
# Causes the cursor to be made visible
self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
self.LCD_ON_CURSOR)
def hide_cursor(self):
# Causes the cursor to be hidden
self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)
def blink_cursor_on(self):
# Turns on the cursor, and makes it blink
self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
self.LCD_ON_CURSOR | self.LCD_ON_BLINK)
def blink_cursor_off(self):
# Turns on the cursor, and makes it no blink (i.e. be solid)
self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
self.LCD_ON_CURSOR)
def display_on(self):
# Turns on (i.e. unblanks) the LCD
self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)
def display_off(self):
# Turns off (i.e. blanks) the LCD
self.hal_write_command(self.LCD_ON_CTRL)
def backlight_on(self):
# Turns the backlight on.
# This isn't really an LCD command, but some modules have backlight
# controls, so this allows the hal to pass through the command.
self.backlight = True
self.hal_backlight_on()
def backlight_off(self):
# Turns the backlight off.
# This isn't really an LCD command, but some modules have backlight
# controls, so this allows the hal to pass through the command.
self.backlight = False
self.hal_backlight_off()
def move_to(self, cursor_x, cursor_y):
# Moves the cursor position to the indicated position. The cursor
# position is zero based (i.e. cursor_x == 0 indicates first column).
self.cursor_x = cursor_x
self.cursor_y = cursor_y
addr = cursor_x & 0x3f
if cursor_y & 1:
addr += 0x40 # Lines 1 & 3 add 0x40
if cursor_y & 2: # Lines 2 & 3 add number of columns
addr += self.num_columns
self.hal_write_command(self.LCD_DDRAM | addr)
def putchar(self, char):
# Writes the indicated character to the LCD at the current cursor
# position, and advances the cursor by one position.
if char == '\n':
if self.implied_newline:
# self.implied_newline means we advanced due to a wraparound,
# so if we get a newline right after that we ignore it.
pass
else:
self.cursor_x = self.num_columns
else:
self.hal_write_data(ord(char))
self.cursor_x += 1
if self.cursor_x >= self.num_columns:
self.cursor_x = 0
self.cursor_y += 1
self.implied_newline = (char != '\n')
if self.cursor_y >= self.num_lines:
self.cursor_y = 0
self.move_to(self.cursor_x, self.cursor_y)
def putstr(self, string):
# Write the indicated string to the LCD at the current cursor
# position and advances the cursor position appropriately.
for char in string:
self.putchar(char)
def custom_char(self, location, charmap):
# Write a character to one of the 8 CGRAM locations, available
# as chr(0) through chr(7).
location &= 0x7
self.hal_write_command(self.LCD_CGRAM | (location << 3))
self.hal_sleep_us(40)
for i in range(8):
self.hal_write_data(charmap[i])
self.hal_sleep_us(40)
self.move_to(self.cursor_x, self.cursor_y)
def hal_backlight_on(self):
# Allows the hal layer to turn the backlight on.
# If desired, a derived HAL class will implement this function.
pass
def hal_backlight_off(self):
# Allows the hal layer to turn the backlight off.
# If desired, a derived HAL class will implement this function.
pass
def hal_write_command(self, cmd):
# Write a command to the LCD.
# It is expected that a derived HAL class will implement this function.
raise NotImplementedError
def hal_write_data(self, data):
# Write data to the LCD.
# It is expected that a derived HAL class will implement this function.
raise NotImplementedError
def hal_sleep_us(self, usecs):
# Sleep for some time (given in microseconds)
time.sleep_us(usecs)
Download and Upload the pico_i2c_lcd.py
- Click here to download the pico_i2c_lcd.py code;
- Copy the code to a file on Thonny IDE;
- Go to File > Save as… and select Raspberry Pi Pico;
- Save the file with the name pico_i2c_lcd.py (don’t change the name).
# forked from https://github.com/T-622/RPI-PICO-I2C-LCD/
import utime
import gc
from lcd_api import LcdApi
from machine import I2C
# PCF8574 pin definitions
MASK_RS = 0x01 # P0
MASK_RW = 0x02 # P1
MASK_E = 0x04 # P2
SHIFT_BACKLIGHT = 3 # P3
SHIFT_DATA = 4 # P4-P7
class I2cLcd(LcdApi):
#Implements a HD44780 character LCD connected via PCF8574 on I2C
def __init__(self, i2c, i2c_addr, num_lines, num_columns):
self.i2c = i2c
self.i2c_addr = i2c_addr
self.i2c.writeto(self.i2c_addr, bytes([0]))
utime.sleep_ms(20) # Allow LCD time to powerup
# Send reset 3 times
self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
utime.sleep_ms(5) # Need to delay at least 4.1 msec
self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
utime.sleep_ms(1)
self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
utime.sleep_ms(1)
# Put LCD into 4-bit mode
self.hal_write_init_nibble(self.LCD_FUNCTION)
utime.sleep_ms(1)
LcdApi.__init__(self, num_lines, num_columns)
cmd = self.LCD_FUNCTION
if num_lines > 1:
cmd |= self.LCD_FUNCTION_2LINES
self.hal_write_command(cmd)
gc.collect()
def hal_write_init_nibble(self, nibble):
# Writes an initialization nibble to the LCD.
# This particular function is only used during initialization.
byte = ((nibble >> 4) & 0x0f) << SHIFT_DATA
self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
self.i2c.writeto(self.i2c_addr, bytes([byte]))
gc.collect()
def hal_backlight_on(self):
# Allows the hal layer to turn the backlight on
self.i2c.writeto(self.i2c_addr, bytes([1 << SHIFT_BACKLIGHT]))
gc.collect()
def hal_backlight_off(self):
#Allows the hal layer to turn the backlight off
self.i2c.writeto(self.i2c_addr, bytes([0]))
gc.collect()
def hal_write_command(self, cmd):
# Write a command to the LCD. Data is latched on the falling edge of E.
byte = ((self.backlight << SHIFT_BACKLIGHT) |
(((cmd >> 4) & 0x0f) << SHIFT_DATA))
self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
self.i2c.writeto(self.i2c_addr, bytes([byte]))
byte = ((self.backlight << SHIFT_BACKLIGHT) |
((cmd & 0x0f) << SHIFT_DATA))
self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
self.i2c.writeto(self.i2c_addr, bytes([byte]))
if cmd <= 3:
# The home and clear commands require a worst case delay of 4.1 msec
utime.sleep_ms(5)
gc.collect()
def hal_write_data(self, data):
# Write data to the LCD. Data is latched on the falling edge of E.
byte = (MASK_RS |
(self.backlight << SHIFT_BACKLIGHT) |
(((data >> 4) & 0x0f) << SHIFT_DATA))
self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
self.i2c.writeto(self.i2c_addr, bytes([byte]))
byte = (MASK_RS |
(self.backlight << SHIFT_BACKLIGHT) |
((data & 0x0f) << SHIFT_DATA))
self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
self.i2c.writeto(self.i2c_addr, bytes([byte]))
gc.collect()
With the modules loaded to the Raspberry Pi Pico, now you can use the library functionalities in your code to write text to the LCD.
Displaying Static Text – Code
Displaying static text on the LCD is very simple. All you have to do is select where you want the characters to be displayed on the screen and then send the message to the display. If you don’t specify where you want to display the text, it will be written in the first available space.
This simple example displays the “Hello, World!” message in the first row, and then on the second row.
# Rui Santos & Sara Santos - Random Nerd Tutorials
# Complete project details at https://RandomNerdTutorials.com/raspberry-pi-pico-i2c-lcd-display-micropython/
from machine import Pin, SoftI2C
from pico_i2c_lcd import I2cLcd
from time import sleep
# Define the LCD I2C address and dimensions
I2C_ADDR = 0x27
I2C_NUM_ROWS = 2
I2C_NUM_COLS = 16
# Initialize I2C and LCD objects
i2c = SoftI2C(sda=Pin(4), scl=Pin(5), freq=400000)
lcd = I2cLcd(i2c, I2C_ADDR, I2C_NUM_ROWS, I2C_NUM_COLS)
lcd.putstr("It's working :)")
sleep(4)
try:
while True:
# Clear the LCD
lcd.clear()
# Display two different messages on different lines
# By default, it will start at (0,0) if the display is empty
lcd.putstr("Hello World!")
sleep(2)
lcd.clear()
# Starting at the second line (0, 1)
lcd.move_to(0, 1)
lcd.putstr("Hello World!")
sleep(2)
except KeyboardInterrupt:
# Turn off the display
print("Keyboard interrupt")
lcd.backlight_off()
lcd.display_off()
How the Code Works
Let’s take a quick look at how the code works to see how to interact with the LCD.
Importing Libraries
We start by including all the required modules to communicate with the LCD. We’ll use software I2C.
from machine import Pin, SoftI2C
from pico_i2c_lcd import I2cLcd
from time import sleepLCD Properties
On the following lines, define your LCD properties. Our LCD display is 2×16 (2 rows and 16 columns) LCD and the I2C address is 0x27. If your display has different dimensions or if it has a different address, modify the following lines.
# Define the LCD I2C address and dimensions
I2C_ADDR = 0x27
I2C_NUM_ROWS = 2
I2C_NUM_COLS = 16I2C Communication
Then, we initialize I2C on GPIOs 4 and 5, the pins we’re using to connect the LCD.
i2c = SoftI2C(sda=Pin(4), scl=Pin(5), freq=400000)After creating an I2C instance, we can initialize an I2C communication with the LCD using the following line.
lcd = I2cLcd(i2c, I2C_ADDR, I2C_NUM_ROWS, I2C_NUM_COLS)We create a new object called lcd using the I2cLcd() method and pass as arguments, the i2c instance, the address, and the number of rows and columns. We can now use lcd to refer to the LCD screen.
Writing Text
Now, that we have a communication established we can start writing text. Writing simple text is as easy as using the putstr() method on the lcd object and passing as an argument the text we want to display. For example:
lcd.putstr("It's working :)")This will display the “It’s working 🙂” message. Because we didn’t specify a place, and the LCD screen is still empty, it will display the message at (0, 0) first row, first column.
Then, we have a while loop that continuously displays “Hello World!” on the LCD, alternating between the top and bottom rows, creating a simple and repeating display pattern.
while True:
# Clear the LCD
lcd.clear()
# Display two different messages on different lines
# By default, it will start at (0,0) if the display is empty
lcd.putstr("Hello World!")
sleep(2)
lcd.clear()
# Starting at the second line (0, 1)
lcd.move_to(0, 1)
lcd.putstr("Hello World!")
sleep(2)Clearing the Screen
Before writing new information, we clear the contents of the screen using the clear() method.
lcd.clear()Then, we display the string “Hello World!” on the LCD. By default, it starts at the top‑left corner of the display (position 0, 0).
lcd.putstr("Hello World!")This message will be on the screen for two seconds.
sleep(2)After that, we’ll clear the screen again.
lcd.clear()Moving the Cursor
After that, we’ll use the move_to() method that accepts as arguments the row and column number, allowing us to choose where to start displaying text. In this case, we’re setting the cursor position to the beginning of the second line (row 1, column 0) of the LCD. This allows us to display the second “Hello World!” message on the second line.
Turning Off the Backlight
We also add a snippet to turn off the LCD light in case the program is stopped by a keyboard interrupt. You can use the methods backlight_off() and display_off().
except KeyboardInterrupt:
# Turn off the display
print("Keyboard interrupt")
lcd.backlight_off()
lcd.display_off()This simple example shows the most useful methods to interact with the LCD. We encourage you to take a look at the pico_i2c_lcd.py and lcd_api.py modules and check and test other methods you think might be useful.
Testing the Code
Run the previous code on your Raspberry Pi Pico board. You’ll first get a message showing that it is working.
After, it will display the Hello, World! message in the first row for two seconds, and then in the second row for another two seconds. Then, the loop repeats until you stop the program.
Troubleshooting
If the LCD has very little contrast and you can hardly see the characters, rotate the potentiometer at the back to adjust the contrast between the characters and the backlight.
Additionally, make sure you’re powering the LCD using 5V from the VBUS pin. Powering with 3V3 is not enough for most of these modules (unless otherwise specified in the datasheet).
Displaying Scrolling Text
Scrolling text on the LCD is useful to display messages longer than your LCD width (in our case, longer than 16 characters).
The library we’re using doesn’t come with a specific function to scroll the text, but you can build your own function by shifting the text to the left one position at a time. See the example below.
# Rui Santos & Sara Santos - Random Nerd Tutorials
# Complete project details at https://RandomNerdTutorials.com/raspberry-pi-pico-i2c-lcd-display-micropython/
from machine import Pin, SoftI2C
from pico_i2c_lcd import I2cLcd
from time import sleep
# Define the LCD I2C address and dimensions
I2C_ADDR = 0x27
I2C_NUM_ROWS = 2
I2C_NUM_COLS = 16
# Initialize I2C and LCD objects
i2c = SoftI2C(sda=Pin(4), scl=Pin(5), freq=400000)
lcd = I2cLcd(i2c, I2C_ADDR, I2C_NUM_ROWS, I2C_NUM_COLS)
def scroll_message(message, delay=0.3):
# Add spaces to the beginning of the message to make it appear from the right
message = " " * I2C_NUM_COLS + message + " "
# Scroll through the message
for i in range(len(message) - I2C_NUM_COLS + 1):
lcd.move_to(0, 0)
lcd.putstr(message[i:i + I2C_NUM_COLS])
sleep(delay)
try:
lcd.putstr("Testing scroll!")
sleep(2)
# Define the message to be scrolled
message_scroll = "This is a scrolling message with more than 16 characters"
while True:
# Scroll the message on the LCD
lcd.clear()
scroll_message(message_scroll)
except KeyboardInterrupt:
# Turn off the display when the code is interrupted by the user
print("Keyboard interrupt")
lcd.backlight_off()
lcd.display_off()
How the Code Works
In this example, we create a simple function called scroll_message() that accepts as arguments the message to be displayed and the delay between each shift. By default, we set the delay to 0.3 seconds, but you can adjust depending on how fast you want the text to scroll.
def scroll_message(message, delay=0.3):
# Add spaces to the beginning of the message to make it appear from the right
message = " " * I2C_NUM_COLS + message + " "
# Scroll through the message
for i in range(len(message) - I2C_NUM_COLS + 1):
lcd.move_to(0, 0)
lcd.putstr(message[i:i + I2C_NUM_COLS])
sleep(delay)On that function, we start by adding a padding to our message that consists of as many blank spaces as the number of columns (I2C_NUM_COLS) and a final space at the end. We do this to create a space from where to start scrolling.
message = " " * I2C_NUM_COLS + message + " "Then, we have a for loop that will iterate through the characters of our message. We set the cursor position to the top-left corner of the LCD (column 0, row 0) to ensure that each iteration starts from the beginning of the LCD.
lcd.move_to(0, 0)Then, we display a portion of the message on the LCD, starting from the current iteration index i and covering the width of the LCD (I2C_NUM_COLS characters).
lcd.putstr(message[i:i + I2C_NUM_COLS])The following expression message[i:i + I2C_NUM_COLS] gets just a portion of the message starting at the character with index i and ending at character i + IC2_NUM_COLS. As we increase the value of i, we select a new portion of the message, making the scrolling effect.
Finally, the delay at the end will determine the scrolling speed.
sleep(delay)To scroll the text, call the scroll_message() function and pass as arguments the message you want to scroll and the delay time.
scroll_message(message_scroll, 0.4)Testing the Code
Run the previous code on your Raspberry Pi Pico. You should get a scrolling message. You can adjust the scrolling speed in the delay variable in the scroll_message() function.
Displaying Custom Characters
In a 16Ă—2 LCD, there are 32 blocks where you can display characters. Each block is made out of 5Ă—8 tiny pixels. You can display custom characters by defining the state of each tiny pixel. For that, you can create a byte array variable to hold the state of each pixel.
Creating Custom Characters
Most LCDs allow you to upload about 8 custom characters to the memory of the LCD that you can use later. Then, you can access the characters by their index (0 to 7).
To create your custom character, you can go here and design your custom character. Then, generate the byte array variable for your character. For example, a heart:
The byte array is highlighted in yellow. Copy the byte array to a single line. For example, in the case of the heart character:
0x00, 0x0A, 0x1F, 0x0E, 0x04, 0x00, 0x00Save your byte array because you’ll use it later in the code.
Displaying Custom Characters – Code
The following code displays three custom characters, a thermometer, an umbrella, and a heart. You can display any character you want by using its byte array.
# Rui Santos & Sara Santos - Random Nerd Tutorials
# Complete project details at https://RandomNerdTutorials.com/raspberry-pi-pico-i2c-lcd-display-micropython/
from machine import Pin, SoftI2C
from pico_i2c_lcd import I2cLcd
from time import sleep
# Define the LCD I2C address and dimensions
I2C_ADDR = 0x27
I2C_NUM_ROWS = 2
I2C_NUM_COLS = 16
# Initialize I2C and LCD objects
i2c = SoftI2C(sda=Pin(4), scl=Pin(5), freq=400000)
lcd = I2cLcd(i2c, I2C_ADDR, I2C_NUM_ROWS, I2C_NUM_COLS)
# Create custom characters here: https://maxpromer.github.io/LCD-Character-Creator/
thermometer = bytearray([0x04, 0x0A, 0x0A, 0x0A, 0x0A, 0x1B, 0x1F, 0x0E])
lcd.custom_char(0, thermometer)
umbrella = bytearray([0x00, 0x04, 0x0E, 0x1F, 0x04, 0x04, 0x014, 0x0C])
lcd.custom_char(1, umbrella)
heart = bytearray([0x00, 0x0A, 0x1F, 0x1F, 0x0E, 0x04, 0x00, 0x00])
lcd.custom_char(2, heart)
try:
lcd.putstr("Characters")
lcd.move_to(0, 1)
# Display thermometer
lcd.putchar(chr(0))
# Display umbrella
lcd.move_to(2, 1)
lcd.putchar(chr(1))
# Display heart
lcd.move_to(4, 1)
lcd.putchar(chr(2))
except KeyboardInterrupt:
# Turn off the display when the code is interrupted by the user
print("Keyboard interrupt")
lcd.backlight_off()
lcd.display_off()
How the Code Works
First, you need to save your byte array in a variable as follows:
thermometer = bytearray([0x04, 0x0A, 0x0A, 0x0A, 0x0A, 0x1B, 0x1F, 0x0E])Change the byte array for any other characters you may want to display. In our case, we also display an umbrella and a heart.
Then, to save your character on the memory of your LCD, you need to use the custom_char() function on the lcd object and pass as argument the index where you want to save the character and the byte array for that character.
lcd.custom_char (0, thermometer)We do this previous process for all the custom characters we want to display, but each one is saved on a different custom_char() index.
thermometer = bytearray([0x04, 0x0A, 0x0A, 0x0A, 0x0A, 0x1B, 0x1F, 0x0E])
lcd.custom_char(0, thermometer)
umbrella = bytearray([0x00, 0x04, 0x0E, 0x1F, 0x04, 0x04, 0x014, 0x0C])
lcd.custom_char(1, umbrella)
heart = bytearray([0x00, 0x0A, 0x1F, 0x1F, 0x0E, 0x04, 0x00, 0x00])
lcd.custom_char(2, heart)Finally, to display your custom character you just need to use the putchar() function as follows:
lcd.putchar(chr(0))In our case, chr(0) corresponds to the thermometer, the character that we saved on index 0. We proceed similarly for all the other characters. In our case, we display a static message on the first row, and then we display our custom characters on the second row.
try:
lcd.putstr(“Characters”)
lcd.move_to(0, 1)
# Display thermometer
lcd.putchar(chr(0))
# Display umbrella
lcd.move_to(2, 1)
lcd.putchar(chr(1))
# Display heart
lcd.move_to(4, 1)
lcd.putchar(chr(2))As you can see, displaying custom characters is quite simple.
Testing the Code
Run the code on your Raspberry Pi Pico. The LCD will display your custom characters. Feel free to modify the code and display your own custom characters. You can also use several adjacent blocks to create a bigger icon on the display.
Wrapping Up
In this tutorial, you learned how to use an I2C LCD with the Raspberry Pi Pico. We’ve taken a look at how to display static text, scrolling text, and custom characters.
We have a similar guide for an OLED display, that you may find useful:
Now, you can use the LCD display to display useful data like sensor readings, time, data from the internet, and much more. We have guides for several sensors with the Raspberry Pi Pico that you may find useful:
- Raspberry Pi Pico: BME280 Get Temperature, Humidity, and Pressure (MicroPython)
- Raspberry Pi Pico: DHT11/DHT22 Temperature and Humidity Sensor (MicroPython)
- Raspberry Pi Pico: DS18B20 Temperature Sensor (MicroPython) – Single and Multiple
To learn more about the Raspberry Pi Pico, you can use our resources:
Hello, seem the link for the character creator has moved to :
maxpromer.github.io/LCD-Character-Creator/
Thank you for your great work!
Thanks.